- 产品详情
- 产品参数
- 特性描述
- 产品参数
- 文档下载
- 相关产品
Support active poe devices&passive poe devices&non poe devices
STEAMEMO 16- port PoE switch is an active PoE switch, as shown in the figure, when our STEAMEMO 16-port poe switch connect active poe devices, it can transmit data and power over one Ethernet cable to your wireless access points, IP surveillance cameras and VoIP phone.
It also supports passive poe devices and non-poe devices. But please note: If your device is a passive Poe device or a non-Poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter.
|
|
|
|---|---|---|
Fanless designFast heat dissipation, no noise. | 19" Rackmount DesignSupport desktop and 19 inch rack mount installation. Suitable for home, office, small and medium business, surveillance. | LED IndicatorsLED indicators for each port，Quickly check Working status and troubleshoot ports with lights for each. |
| 16-port poe switch | 16-port gigabit poe switch | 8-port gigabit poe switch | 8-port poe switch | 4-port gigabit poe switch | 5 Port 100Mbps Ethernet Unmanaged AI PoE Switch | |
|---|---|---|---|---|---|---|
| Ethernet Port | 19 | 18 | 10 | 10 | 6 | 5 |
| PoE Port | 16 | 16 | 8 | 8 | 4 | 4 |
| SFP Fiber Port | 1x1.25G SFP | 1x1.25G SFP | ||||
| Extender Function | ✓ | ✓ | ✓ | ✓ | ||
| PoE Total Budget | 240W | 240W | 120W | 120W | 52W | 52W |
| Management Type | Unmanaged | Unmanaged | Unmanaged | Unmanaged | Unmanaged | Unmanaged |
| AI PD Detection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| For Bussiness | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Dimensions LxWxH | 10.6 x 7 x 1.8inches | 10.6 x 7 x 1.8 | 7.5 x 5.5 x 1.7inches | 7.5 x 5.5 x 1.7inches | 5 x 4.5 x 1.3 inches | 4.9 x 4.5 x 1.3 |
| Mounting Options | Desktop, Wall or Rack Mount | Rack Mount or Wall | Desktop or Wall | Desktop or Wall | Desktop or Wall | Desktop or Wall |
Please note:
Theoretically, the PSE device interface can detect the PD automatically when the PD is connected. If the power is insufficient to provide the required power for PD, the PD will not get powered. Make sure the power for running the PDs will not exceed the power budget of the PoE network switch. Limit the per-port current at safe levels and use the extra PSE devices if needed.