STEAMEMO 24 port gigabit PoE switch support up-link SFP ports, each of our PoE Switch is equipped with an SFP module, there is no need to worry about the incompatibility between fiber modules and switches
Full Gigabit Port
STEAMEMO 26 port PoE switch includes 24 gigabit POE ports and 2 gigabit SFP uplink port, it is use for applications that also require high data throughput due to the use of high-resolution camera.
Port-based VLAN
When you turn on the VLAN mode, switch divides traffic for ports 3-24 to prevent IP camera's muliticast or broadcast storm from affecting each other.
AI Watchdog Protection
STEAMEMO 26 port gigabit PoE switch compatible with IEEE 802.3af/at protocol, it determines and delivers the exact power supply to your devices with up to 30W power output. If a device not IEEE802.3af/at compliant, only network data will be transmitted through the LAN cable to avoid from being damaged by incorrect power sending.
4 KV Lighting Protection
STEAMEMO PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, it can adapt to harsh outdoor environment and ensure the reliability of the uninterrupted network system.
pay attention!
Note: STEAMEMO active POE switchs support passive poe devices&non poe devices, but when the switch is directly connected to passive poe devices or non-poe devices, the switch can only transmit data and cannot power the device, so the device needs to be powered separately. Or use an active poe splitter between the switch and your passive poe device and non-poe device,So that the switch can transmit data and electricity at the same time.
This is very important and must be noted!
Fully Compatible
support active poe devices&passive poe devices&non poe devices
The STEAMEMO POE switch is an active POE switch, as shown in the figure, it supports active poe devices, and it can work when connected to your device. It also supports passive poe devices and non-poe devices, But please note: If your device is a passive Poe device or a non-Poe device, the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter.
Connect all your devices with gigabit switch
Multiple installation options
Maximum support 360W high output power, each port max power supply reached 30W.
When connecting non-poe devices, please use a poe splitter between the switch and the device
Please Note:
Theoretically, the PSE device interface can detect the PD automatically when the PD is connected. If the power is insufficient to provide the required power for PD, the PD will not get powered. Make sure the power for running the PDs will not exceed the power budget of the PoE network switch. Limit the per-port current at safe levels and use the extra PSE devices if needed.